| Supply voltage |
10-30VDC |
| Ripple voltage |
≤10% |
| No-load current |
≤150mA |
| Power |
1.5W |
| Analog output |
4...20mA, 0...5V or 0...10V |
| Switch output |
<PNP \ NPN output type>
PNP \ NPN open collector transistor
Maximum sink current: 200mA
External voltage: 24V DC or less (between output and +V)
Residual voltage: 1.5V or less |
Communication
type |
RS485，IO-Link |
| Light source |
655nm laser source |
| Operation indicator |
Yellow LED indicator (lights up when the
output is ON), through typ e on the receiver |
| Power indicator |
Green LED (lights up when power is applied) |
Population
degree |
3 (Industrial environment) |
| Protection |
IP65（IEC） |
| Temp. |
-25 〜+55℃ (Becareful not to condense or freeze), when stored: -40 〜+70℃ |
| Humidity |
50%RH（70℃） |
Light
intensity |
Incandescent lamp: the illuminance of the light-receiving surface is below 5000lx |
| EMC |
EN 60947-5-2 |
| Voltage reverce protection |
500V AC for one min. between all supply terminals connected together and enclosure |
| Vibration resistance |
10~55Hz frequency,0.5mm amplitude in X,Y and Z directions for 1.5 hours each |
| Shock resistance |
10~55Hz frequency,0.5mm amplitude in X,Y and Z directions for 1.5 hours each |
| Repeatability |
1mm@400...600mm |
| Material |
Enclosure： Stainless steel | Lens: PMMA |
| Response time |
1.5ms / 5ms / 10ms switchable |
| Dimensions |
60.4*20*35.5mm |
