This VL1A-NF18-08NC-ACL2M is an inductive proximity sensor with a M18 mm Nickel plated brass body with a Non Flush mounting design. It has a metal body length of 55 mm and is 2 Wire , AC, NC, with a sensing distance of 8 mm and an 2m PVC cable. It has a power supply of 20~250V and protection rating of IP67. This highly durable sensor is perfect for Industrial Automation applications.
VL1A-NF18-08NC-ACL2M
FEATURES :
Installation: Non Flush
Sensing distance: 8 mm
Body material: Nickel plated brass
Body diameter & lenght : M18 , 55 mm
Output: 2 Wire - Normaly close
Connection: 2m, 2 wire PVC cable
Power supply: 20~250V ACINDUCTIVE SPECIFICATION
Correction Factor Nav-ferrous metal Factor Sensing Factor Fe360
Aluminum
Brass
Copper
Stainless Steel
Cast Iron
Nickel
1
0.35 ~ 0.45
0.35 ~ 0.5
0.35 ~ 0.45
0.35 ~ 0.45
0.93 ~ 1.05
0.65 ~ 0.75
Mounting
Non Flush type installation Switching Histeresis < 10% ELECTRICAL DATA
Operating voltage 20~250V AC Switching frequency 25Hz Voltage drop ≤ 8V AC Leakage current ≤ 1.8mA Load current 200 mA No load current Max.load:400 mA ; Min.load:5mA Hysteresis < 15% (Sr) Repeatability < 1.0% (Sr) Temperature drift < 10% (Sr) Short Circuit protection Yes Overload protection Yes Polarity reversal protection Yes ENVIRONMENT DATA
Ambient temperature -25......70 °C Protection rating IP67 MECHANICAL DATA
Housing material Nickel plated brass Face material PBT ELECTRICAL CONNECTION DATA
Connector PVC cable/2m ; 2*0.35mm2 ACCESORIES
Cable Two meter angled cable (P/N: V5PN-AM12402OF) (available) Cable Ten meter angled cable (P/N: V5PN-AM12410OF) (available) Connector M12, 4 PIN, Male type, IP67, Straight, Screw
connection (P/N: EAM12MC4001A) (available)